Maintaining the oil track link for a bulldozer involves several steps. Here's a general guide on how to perform maintenance on the track link:

1. Clean the Track Link: Start by removing any dirt, debris, or mud that has accumulated on the track link. Use a high-pressure water hose or a pressure washer to wash away the grime. Ensure that the track link is thoroughly cleaned before proceeding to the next steps.

2. Inspect for Damage: Carefully inspect the track link for any signs of damage, such as cracks, excessive wear, or loose components. Look for any bent or broken track links. If any issues are identified, they should be addressed promptly by replacing or repairing the damaged parts.

3. Lubricate the Track Link: Apply a suitable lubricant or oil specifically designed for the track link. Most bulldozer track links have oil seals and lubricating points. Follow the manufacturer's recommendations regarding the type of lubricant to use and the lubrication intervals. Apply the lubricant evenly to all moving parts of the track link, such as pins, bushings, and rollers.

4. Check Tension and Alignment: Ensure that the track link is properly tensioned and aligned. Too loose or too tight track links can lead to premature wear and reduce machine efficiency. Refer to the bulldozer's manual for the recommended tension specifications, and adjust the track link accordingly.

5. Monitor Wear: Regularly monitor the wear of the track link components. Pay attention to the condition of the track shoes, rollers, and sprockets. Excessive wear may indicate the need for replacement and should be addressed promptly.

6. Track Link Adjustment: If the track link becomes too loose during operation, it will affect the machine's performance and increase the risk of damage. Regularly check the track link for proper tension and make adjustments if necessary. Follow the instructions provided in the bulldozer's manual for adjusting the track link tension.

7. Regular Inspections: Perform routine inspections of the track link and other undercarriage components to identify any potential issues early. This includes checking for loose or damaged bolts, abnormal wear patterns, and oil leaks. Promptly address any problems found during the inspections.

Remember to consult the specific maintenance guidelines provided by the bulldozer's manufacturer for detailed instructions and recommendations tailored to your machine. Adhering to regular maintenance schedules and best practices will help ensure the optimal performance and longevity of the bulldozer's track link.

Introduction

In the heavy machinery industry, excavators play a crucial role in construction, mining, and earthmoving projects. To maintain peak efficiency and longevity, high-quality undercarriage components are essential. Among these, Bottom Track Rollers, Sprockets and Segments, and Ground Engaging Tools (GET) significantly impact an excavator’s performance, durability, and operational costs.

In this article, we will explore how these key components contribute to the efficiency of excavators, why high-quality materials and precision engineering matter, and how choosing the right supplier can enhance your machine’s productivity and lifespan.

1. Bottom Track Rollers: The Foundation of a Reliable Undercarriage

Bottom track rollers, also known as lower rollers, are vital components in an excavator’s undercarriage system. These rollers support the weight of the machine and ensure smooth movement across different terrains.

Key Benefits of High-Quality Bottom Track Rollers:

• Enhanced Durability – Made from hardened steel and treated with heat-resistant coatings, premium track rollers withstand extreme working conditions.

• Reduced Wear and Tear – Precision engineering reduces friction and wear, extending the service life of both the rollers and the track chain.

• Better Load Distribution – Properly designed rollers evenly distribute machine weight, minimizing stress on the undercarriage.

Signs of Worn-Out Track Rollers:

• Excessive noise and vibration during operation.

• Uneven track tension leading to misalignment.

• Visible cracks, dents, or flattening of the roller surface.

2. Sprockets and Segments: Power Transmission for Optimal Performance

Sprockets and segments play a critical role in transferring power from the engine to the tracks, driving the excavator forward with precision.

Why High-Quality Sprockets Matter:

• Superior Material Strength – Forged and heat-treated materials increase wear resistance and toughness.

• Extended Track Life – Properly matched sprockets minimize stress on track links, reducing premature failure.

• Improved Efficiency – Well-designed sprockets reduce energy loss and enhance fuel efficiency.

When to Replace Your Sprockets and Segments:

• Worn-out or hooked teeth.

• Uneven wear on the track links.

• Decreased machine performance or track slippage.

3. Ground Engaging Tools (GET): Maximizing Digging Efficiency

Ground Engaging Tools (GET) are the front-line components of an excavator that directly interact with soil, rock, and other materials. These include bucket teeth, cutting edges, rippers, and shanks.

Benefits of High-Quality Ground Engaging Tools:

• Enhanced Productivity – Sharper, durable GET components increase digging efficiency and penetration.

• Lower Operating Costs – Tougher materials reduce frequent replacements, cutting downtime and expenses.

• Improved Safety – Well-maintained GET ensures smooth operation, reducing stress on the machine and operator.

Common Signs of Worn-Out GET:

• Blunt or broken bucket teeth.

• Uneven cutting edges.

• Reduced digging performance and increased fuel consumption.

Choosing the Right Supplier for Excavator Parts

Not all excavator parts are created equal. Choosing a reliable supplier ensures you receive high-quality components that extend machine lifespan, reduce maintenance costs, and improve productivity.

At Yint Parts, we specialize in manufacturing premium Bottom Track Rollers, Sprockets and Segments, and Ground Engaging Tools designed for superior performance in demanding conditions. Our products are made using advanced materials and cutting-edge manufacturing techniques, ensuring durability, reliability, and cost-effectiveness.

Why Choose Yint Parts?

✅ High-Quality Materials – Precision-engineered with industry-leading materials. ✅ Strict Quality Control – Rigorous testing ensures durability and performance. ✅ Wide Compatibility – Designed to fit various excavator brands and models. ✅ Competitive Pricing – High-value products at cost-effective rates.

Conclusion: Invest in Quality for Long-Term Excavator Performance

Ensuring your excavator is equipped with durable and high-performing Bottom Track Rollers, Sprockets and Segments, and Ground Engaging Tools is crucial for maximizing productivity and reducing operational costs. Regular inspections, timely replacements, and sourcing from a trusted supplier like Yint Parts will keep your machines running smoothly and efficiently.

Hardening: Heat treatment techniques such as quenching and tempering can be used to increase the hardness and strength of steel. This is particularly beneficial for components that require high wear resistance, such as cutting tools, gears, and bearings.

Annealing: Annealing involves heating the steel to a specific temperature and then slowly cooling it to soften the material and relieve internal stresses. It improves the machinability, ductility, and toughness of the steel. Annealing is commonly used for components that need to be easily formed or welded, such as sheet metal, rods, and wire.

Stress Relief: Welded or mechanically processed steel components often develop residual stresses that can lead to distortion or reduced mechanical properties. Heat treatment can help relieve these stresses, enhancing the dimensional stability and preventing failures.

Transformation of Microstructure: Heat treatment alters the microstructure of steel, which directly influences its mechanical properties. Processes like quenching, tempering, and austenitizing cause phase transformations that result in desired structures such as martensite, pearlite, or bainite. This, in turn, affects the material's hardness, strength, toughness, and ductility.

Case Hardening: Case hardening treatments like carburizing and nitriding create a hard, wear-resistant surface layer on the steel while retaining the toughness of the core. This is useful for applications where resistance to wear, fatigue, and surface contact is necessary, such as gears, shafts, and camshafts.

Dimensional Stability: Heat treatment can help improve the dimensional stability of steel components, reducing the risk of distortion or dimensional changes that may occur during subsequent machining or usage.

Grain Refinement: Heat treatment can refine the grain structure of steel, resulting in finer grains. This can enhance the material's strength, toughness, and fatigue resistance, particularly in high-stress applications.

It's important to note that the specific heat treatment process and parameters depend on the type of steel, desired properties, and intended application of the final product. Skilled heat treatment practitioners follow established standards, procedures, and control measures to ensure consistent and reliable results in the treated steel products.

YinTai is specialized in the complete set of bulldozer and excavator spare parts,including track chain,track Shoe,track roller,idler,sprocket,etc.We won good reputation around the world.Trustworthy. Welcome to consult!

Track-chain tension adjustment is the most controllable factor in undercarriage wear life. The accurate track sag of many crawler machines is 2 inches. Due to the complicated ground conditions, Track tension changes with many variations. You should clean out your tracks in daily life.

Cleaning track: Remove out between the track and the roller frame with a shovel, preferably when the packed

material is still wet.

During working, stuck and packed materials between mating components such as rollers, links, sprocket teeth, and bushings improve track tension degree. So tension needs to be adjusted any time packing in the track chain changes.

When crawl machines go along, it should tighten the track up, so getting them cleaned out and adjusted is the important point to undercarriage life.

To measure track-chain tension:

* Roll the machine forward slowly and allow it to roll to a stop.

* Center a track pin over the carrier roller.

* Lay a straightedge or stretch a string over the track grousers.

* Measure sag between the straight edge and grouser tip where the track sags the lowest.

The track adjuster is a grease-filled hydraulic cylinder used to maintain track tension. To adjust track tension, add grease or remove grease from the track adjuster. Eliminating pitch extension, or chain stretch slows sprocket tooth wear and bushing outside-diameter wear.

The excavator track chain, also known as the track link assembly, is a vital component in an excavator’s undercarriage. Its primary functions are closely related to those of track chains in general for tracked vehicles, but with specific considerations for excavators. Here are the main functions of the excavator track chain:



Weight Distribution and Stability:

Like other track chains, the excavator track chain helps distribute the machine’s weight over a larger surface area. This is crucial for preventing the excavator from sinking into soft or uneven terrain and contributes to overall stability during operation.



Traction and Mobility:

The excavator track chain provides traction, enabling the excavator to move efficiently across various terrains. It is particularly important in excavation sites where the ground may be uneven or consist of loose soil, rocks, or other challenging conditions.



Support for the Track Shoes:

The track chain supports the track shoes, which are the components that come into direct contact with the ground. The track shoes help to further distribute the weight of the excavator and provide additional traction.



Durability and Resistance to Wear:

Excavators are subjected to demanding working conditions, and the track chain is designed to be durable and resistant to wear. It must withstand the stress and abrasion associated with digging, loading, and maneuvering in harsh environments.



Ease of Maintenance:

Excavator track chains are designed to be easily maintained. Regular inspection, lubrication, and replacement of worn components are essential to ensure optimal performance and longevity of the undercarriage.



Adjustability:

Some excavators are equipped with an adjustable track tensioning system. This allows operators to adjust the tension in the track chain, ensuring proper track alignment and minimizing premature wear on components.



Smooth Operation:

A well-maintained and properly tensioned track chain contributes to the smooth operation of the excavator. It allows for precise control during digging, lifting, and other tasks, enhancing the overall efficiency of the machine.

In summary, the excavator track chain is a critical component that supports the excavator's weight, provides traction, and contributes to the machine's stability and mobility. Regular maintenance and proper tensioning are essential for ensuring the longevity and optimal performance of the excavator's undercarriage.

YinTai offers many types of track links and offer customized products. We use advanced machining center, horizontal and vertical CNC machining, heat-treatment equipment to execute processes. OEM standard! binochen@yintparts.com

The Future Trends of Global New Energy Vehicles and the Growing Demand for Coolant Circulation Pumps

 

As the world accelerates its transition to cleaner and more sustainable energy solutions, new energy vehicles (NEVs) have emerged as one of the most promising technologies to reduce carbon emissions. The rise of electric vehicles (EVs) and hybrid vehicles is transforming the global automotive industry, with significant implications for various components, including coolant circulation pumps. This blog explores the future trends of NEVs, the growing demand for coolant circulation pumps, and the production base distribution and technological advantages of these pumps.

Global Trends in New Energy Vehicles (NEVs)

 

New energy vehicles, which primarily include electric vehicles (EVs), hybrid vehicles (HEVs), and plug-in hybrid vehicles (PHEVs), are experiencing rapid growth globally. According to industry reports, the global EV market is expected to reach nearly 40 million units by 2040, with EVs accounting for more than 50% of global car sales by 2035. This shift is driven by government incentives, stricter emission regulations, and increasing consumer demand for greener, more energy-efficient transportation options.

 

In addition to the increased adoption of electric vehicles, the market for hydrogen fuel cell vehicles (FCVs) and autonomous electric vehicles is also expanding. These advancements are fueled by innovations in battery technology, charging infrastructure, and vehicle design. As a result, the automotive industry is witnessing a significant transformation toward more sustainable and efficient transportation solutions.

 

The Growing Demand for Coolant Circulation Pumps

 

With the rise of NEVs, the demand for coolant circulation pump is also on the rise. These pumps play a crucial role in maintaining optimal operating temperatures for electric and hybrid vehicle systems, including batteries, power electronics, and electric motors. Efficient thermal management is essential to ensure the safety, performance, and longevity of these components.

In traditional internal combustion engine (ICE) vehicles, the engine itself generates heat that is managed through a liquid coolant system. In contrast, NEVs require advanced cooling solutions for high-voltage battery packs, inverters, and other electrical components, which operate at much higher temperatures. As a result, coolant circulation pumps that can provide precise temperature control and maintain the efficiency of these systems are in high demand.

 

Furthermore, the growing popularity of electric vehicles with higher performance capabilities, such as fast-charging EVs, has increased the need for more efficient cooling solutions. Coolant circulation pumps help to manage the heat generated during rapid charging and discharging, ensuring that the battery operates within safe temperature limits.

 

Technological Advantages of Coolant Circulation Pumps

 

The growing demand for car coolant pump has spurred significant technological advancements in pump design and manufacturing. Modern coolant pumps for NEVs are more energy-efficient, durable, and compact than their traditional counterparts. Key technological advantages include:

 

1. Brushless DC Motor Technology: Coolant circulation pumps for NEVs often utilize brushless DC (BLDC) motors, which offer higher efficiency, quieter operation, and longer lifespan compared to traditional brushed motors. BLDC motors are also more energy-efficient, reducing the overall power consumption of the vehicle's cooling system.

 

2. Smart Control Systems: Many modern coolant pumps are equipped with advanced control systems that enable real-time monitoring of temperature and flow rates. These systems ensure that the pump operates optimally, adjusting the coolant flow based on temperature fluctuations to maintain consistent performance.

 

3. Compact and Lightweight Design: With space and weight being critical factors in electric vehicle design, coolant circulation pumps are becoming more compact and lightweight. These pumps are engineered to fit into tight spaces within the vehicle while maintaining high-performance standards.

 

4. Corrosion-Resistant Materials: Coolant circulation pumps used in EVs are often made from corrosion-resistant materials to ensure durability and long-term performance, even in harsh operating conditions.

 

5. High-Temperature Resistance: As EVs continue to push the limits of performance, coolant pumps are being designed to handle higher temperatures, ensuring that battery packs and power electronics remain cool under heavy loads.

 

Conclusion

The global shift toward new energy vehicles is reshaping the automotive industry, and with it, the demand for efficient cooling solutions like coolant circulation pumps. As electric vehicles and hybrid vehicles become more prevalent, the need for advanced, energy-efficient pumps will continue to grow. Manufacturers are responding with cutting-edge technologies that offer enhanced performance, reliability, and energy efficiency, ensuring that coolant circulation pumps play a critical role in the success of NEVs worldwide.

 

As the demand for new energy vehicles continues to rise, the global production of coolant circulation pumps is poised to expand, with key manufacturing hubs in China, Europe, and North America driving innovation and meeting the needs of the growing market.

 

Introduction to Brushless DC Pump Applications: Innovative Solutions for Efficiency and Performance

 

With the growing demand for energy efficiency, sustainability, and smart technology, Brushless DC Pumps (BLDC pumps) have become a game-changer in various industries. Known for their high performance, low noise, and long lifespan, BLDC pumps are widely used in applications ranging from water heating systems to electric vehicle cooling. As a professional manufacturer of BLDC pumps, Thermo Pump is committed to providing high-quality pumps to meet diverse customer needs across various industries.

 

1. Water Heaters and Hot Water Re-circulation Systems

 

In water heating systems, BLDC pumps play a crucial role in efficiently circulating water, ensuring fast and consistent water flow while maintaining a stable temperature. Cold water recirculation pumps are ideal for hot water recirculation because of their low energy consumption and quiet operation. Water recirculation pump offer an innovative solution that prevents the waste of cold water and provides immediate access to hot water.

 

Advantages:

· Energy Efficient: BLDC pumps have higher efficiency compared to traditional AC pumps, reducing energy consumption.

· Low Noise: With sound levels as low as ≤25dB @ 1M, BLDC pumps are perfect for residential and office environments.

· Long Lifespan: The lack of brushes reduces mechanical wear, extending the lifespan of the pump.

 

2. Electric Vehicles (EV) and EV Charging System Cooling

 

With the rapid growth of the electric vehicle (EV) market, BLDC pumps are increasingly used in EV battery cooling and charging systems. Car coolant pump provide an efficient liquid cooling solution to control the battery temperature, extend battery life, and improve charging efficiency. Their small size and energy efficiency make them ideal for automotive applications.

 

Advantages:

· Efficient Cooling: BLDC pumps precisely control the coolant flow, ensuring batteries remain within safe temperature ranges during charging.

· Heat Resistance: These pumps are designed to withstand high operating temperatures, making them suitable for EV battery cooling.

· Compact Design: The small size of BLDC pumps allows easy installation in the limited space within electric vehicles, saving space while maintaining performance.

 

3. Smart Home and Intelligent Toilet Systems

 

BLDC pumps are widely used in smart home systems, particularly in intelligent toilets. In smart toilets, smart toilet pumps are responsible for providing precise water flow control, enhancing flushing efficiency while maintaining quiet operation. Other smart home applications, such as HVAC systems, water-heated mattresses, and refrigerators, also benefit from the efficiency and reliability of BLDC pump motor.

 

Advantages:

· Precise Control: BLDC pumps allow precise control of speed and flow, adapting to various needs.

· Silent Operation: Their quiet nature makes them ideal for use in bathrooms and bedrooms where noise is a concern.

· Smart Compatibility: BLDC pumps are compatible with smart home systems, allowing for automated adjustments and remote control.

 

4. Car Refrigerators and Portable Ice Makers

 

Micro dc pumps are also used in car refrigerators and portable ice makers, providing reliable cooling solutions. These devices require pumps that can operate continuously and efficiently, and small DC pumps are the perfect solution due to their low power consumption and high efficiency. In particular, for car applications, water pump bldc motor ensure long-lasting performance with minimal energy usage.

 

Advantages:

· Low Power Consumption: BLDC pumps have very low power consumption, making them ideal for continuous operation in battery-powered devices.

· High Efficiency: They efficiently circulate the coolant to ensure stable cooling performance in refrigerators and ice makers.

· Adaptability: BLDC pumps are designed to operate in diverse environments, ensuring reliable performance even in fluctuating temperatures.

 

5. Automotive Air Conditioning Systems

 

In modern automotive air conditioning systems, coolant circulation pumps are used for circulating coolant in both water cooling systems and AC refrigerant cycles. Small coolant pump provide stable and efficient coolant flow, ensuring that the air conditioning system works optimally, particularly in electric vehicles where energy efficiency is critical.

 

Advantages:

· Efficient Cooling: BLDC pumps ensure a steady flow of coolant, maintaining optimal performance in air conditioning systems.

· Durability: These pumps are designed to operate under high stress, ensuring long-term reliability and performance.

· Energy Saving: BLDC pumps reduce energy consumption, particularly important in electric vehicles where battery life is crucial.

 

Conclusion

 

Thermo Brushless DC pumps (BLDC pumps) offer a range of benefits, including high efficiency, low noise, and long lifespan, making them ideal for use in various applications. From water heaters to electric vehicles, smart homes to car refrigerators, Thermo micro dc pumps provide innovative fluid management solutions that meet the demands of modern industries.

 

If you are looking for high-performance, energy-efficient, and reliable pump solutions, Thermo mini water pumps are your best choice. Contact us today to learn more about our products and customized solutions. We are here to help you succeed with our cutting-edge pump technologies!

Water pumps are essential components in various industries, from residential water systems to industrial applications, and their efficiency and performance have a direct impact on operational costs and sustainability. Over the years, pump technology has evolved significantly, with DC (Direct Current) pumps and AC (Alternating Current) pumps being the two primary types in the market. While AC pumps have traditionally been the standard due to their stability and cost-effectiveness, DC pumps have gained significant traction in recent years thanks to advancements in energy efficiency, compact design, and precise control features. Market trends reflect a growing demand for energy-efficient and environmentally friendly solutions, driven by both consumer preferences and stringent environmental policies globally. As businesses and governments alike focus on reducing carbon footprints and enhancing the efficiency of energy use, DC pumps are expected to play an increasingly important role in sectors such as residential water heating, electric vehicles, and renewable energy systems. This shift in demand is further influenced by historical advancements in motor technology, changing user needs for more versatile and cost-effective solutions, and the ongoing development of policies favoring sustainable technologies.

 

1. Working Principle

· DC Pumps: These pumps use a DC power supply and control the motor speed through an electronic controller, providing high-speed adjustment accuracy. DC pumps typically use permanent magnet motors, making them compact and efficient.

· AC Pumps: These pumps use an AC power supply, with the motor generating torque from alternating current. AC pumps generally require more complex control systems and often need frequency converters to adjust the speed.

 

2. Efficiency and Energy Consumption

· DC Pumps: DC pumps are generally more energy-efficient because they use permanent magnet motors and can adjust the speed according to the load. As a result, they are more energy-efficient at lower loads compared to AC pumps.

· AC Pumps: AC pumps typically have lower efficiency, especially under varying loads, leading to higher energy consumption.

 

3. Speed Control

· DC Pumps: DC pumps offer excellent speed control by adjusting voltage or current, making them highly flexible for applications that require frequent flow rate adjustments.

· AC Pumps: Speed control in AC pumps is more complex and typically requires additional equipment like variable frequency drives (VFDs), making them less flexible and precise compared to DC pumps.

 

4. Lifespan and Maintenance

· DC Pumps: DC motors usually is brushesless motor, so maintenance is low, and the lifespan is relatively long.

· AC Pumps: AC motors often require periodic maintenance, such as replacing brushes, and may have a shorter lifespan due to internal wear.

 

5. Cost

· DC Pumps: DC pumps are generally more expensive to manufacture due to their advanced motor technology, but they can save energy and maintenance costs in the long run.

· AC Pumps: AC pumps are less expensive to manufacture but tend to incur higher operational and maintenance costs over time.

 

6. Noise

· DC Pumps (Brushless DC Pumps): Low Noise Levels, One of the standout features of DC pumps, particularly brushless DC pumps (BLDC), is their ultra-quiet operation. The brushless design reduces mechanical wear and tear, leading to less vibration and noise generation. Additionally, the precise electronic control used to adjust the speed of DC pumps contributes to smoother and quieter operation compared to AC pumps.

· AC Pumps: Higher Noise Levels: AC pumps tend to generate more noise due to their electromagnetic induction and the presence of brushes in traditional AC motors (in some older models). The rotating magnetic field and mechanical components can result in vibrations that contribute to higher noise levels, especially when the pump operates at higher speeds or under varying load conditions.

 

7. Market Applications

· DC Pumps: Due to their higher efficiency, precise speed control, and compact size, DC pumps are widely used in:

o Water circulation systems (e.g., household water heaters, HVAC systems, solar water pumps)

o Automotive cooling systems (e.g., electric vehicle cooling pumps, air conditioning pumps)

o Smart home devices (e.g., smart toilets, electronic heating systems)

With the growing demand for energy efficiency and sustainability, DC pumps are gaining traction, especially in the fields of home automation, electric vehicles, and renewable energy systems.

· AC Pumps: AC pumps are commonly used in traditional large-scale industrial systems, commercial HVAC systems, and long-term, continuous operations. They are reliable and stable, especially for high-flow or high-power applications.

 

8. Future Market Trends

· DC Pumps Market Trend:

o High Growth Potential: DC pumps are expected to see continued growth in applications such as water circulation, air conditioning, and electric vehicles due to their energy efficiency and performance.

o Smart Integration: The integration of IoT (Internet of Things) and AI (Artificial Intelligence) in DC pumps will enable remote monitoring, intelligent adjustment, and predictive maintenance, further increasing their market appeal.

o Miniaturization and Integration: With advancements in technology, DC pumps will become more compact and integrated, suitable for use in smaller devices and systems.

 

· AC Pumps Market Trend:

o Stable Demand: AC pumps will continue to dominate in traditional industries where high flow rates and continuous operation are essential, such as large industrial systems and commercial HVAC.

o Transition to Energy Efficiency: As energy efficiency becomes a priority globally, some high-energy consumption AC pumps will be gradually replaced by more efficient DC pumps, especially in smaller systems.

 

Summary

DC pumps offer superior efficiency, energy savings, speed control, and low maintenance costs, making them ideal for applications in smart homes, water circulation, and electric vehicles. AC pumps, on the other hand, remain dominant in traditional large-scale systems, where they provide reliable, continuous operation. The future market will likely favor more energy-efficient, smart, and eco-friendly solutions, where DC pumps will continue to gain ground due to their advantages in energy efficiency and intelligent capabilities.

Beiben trucks mainly include beiben tractor trucks, beiben dumper trucks, beiben tanker trucks, and beiben all-wheel-drive trucks, which is popular overseas because of the good quality, super engine power and relatively lower price. To be more specifically, all beiben trucks use originally Germany Mecedes benz axle technology, WEICHAI super engine, world advanced ZF steering device and FAST manual transmission gearbox for easy driving. Considering the high quality, our beiben trucks price is 20~30% lower than others.

       

(CEEC can provide beiben tractor trucks, beiben dumper trucks, beiben right hand drive trucks to satisfy all dear customers)

         

Being the one who manufacture under the license of Germany Benz Heavy-Duty Truck technology, we CEEC products can match with Germany Benz, Deutz Engine and famous domestic WeiChai engine, with engine power range from 240HP to 480HP. Recently, the main products such as beiben 2538 tractor truck, beiben 2638 tractor truck, beiben 2529 dump truck, beiben 2534 dump truck, beiben 2538 all-wheel-drive trucks are among the best share in China, and have entered the world market such as the Middle East, including Saudi Arabia, Pakistan,Uzbekistan, etc. the Southeast Asia, including Myanmar, Cambodia, Laos, etc.the South American,  including Ecuador, Peru, Trinidad and Tobago,etc. the Africa, including Kenya, Ethiopia, Congo, South Africa, Sudan, Angola, Mozambique, etc.  And some island countries.According tostatistics, Beiben trucks sum with 7 catagories, 28 series, and morethan 500 varieties of products.

           

(Beiben trucks in CEEC factory stock for quick delivery)

            

As professional beiben trucks supplier in China, We CEEC TRUCKS not only provide best beiben trucks, but also genuine beiben spare parts:

      

As the Genuine Beiben Spare Parts Supplier, we CEEC can provide different kind of parts to meet customer requirement. The North Benz spare parts are suitable for NG80A, NG80B and V3 series beiben heavy-duty trucks. Detailed classification can be Driver’s CAB, WEICHAI Engine, Gearbox, Axle Parts, Chassis Parts, Steering Device, Brake System, etc. Beside, we can also provide other parts, such as fuel pump, water pump, filters, valves, hydraulic cylinder, links, etc. to help maintenance ISUZU fuel tanker truck, water sprinkler truck, ISUZU garbage compactor truck, combined jetting truck, truck mounted crane, aerial work platform, firefighting truck and so on. CEEC spare parts warehouse showing as below:

      

  

     

 

The best beiben trucks supplier CEEC will provide best service for all our customers:

         

CEEC TRUCKS treat Shipping Service as one of the most significant segment in our service chain. From the Beiben Trucks get finished in the plant and being carefully tested by CEEC engineers,till the truck delivery to our customer. During this period, we will provide the shipping service to not only just satisfy but also surpass the extentions of our customers.
         
As the company with over ten years experience, CEEC TRUCKS considering customers firstly and provide shipping service for customers Beiben tractor trucks, beiben dumper trucks, Isuzu fuel tanker trucks, garbage compactor trucks mainly has following three aspects: All trucks being waxed; All parts being packed; All details being photographed.

      

       

Last and most important thing that is how does CEEC TRUCKS provide beiben trucks to our customer:

       

CEECTRUCKS is responsiable for each truck that produced by us:

Inquiry: Each inquiry will get full support from CEEC TRUCKS.

Design:CEEC engineers will analysis customers requirement and give best design for thetruck,and make sure the truck is 100% meet customers needs. 

Production: Use advanced equipments and most suitable material toproduce best truck for customers.

Delivery: All been carefully waxed before shipment.

After-sale Service: 12 months warranty period and provide operation technical support.

 

Our products allow you to view the external areas of the vehicle in real time while driving,helping you bid farewell to the blind area of vision,and solve the problem of reversing and parking.

Car Fitment	for AUDI
Model Number	RS-1108
MOQ	1
Voltage	12v
Video input formats	NTSC
Installation	Plug Installation
Video Output	for CVBS input

 

Intro:

This camera interface is developed for the original screen of AUDI MIB3.It can achieve in-depth integration with cameras in all directions,clearly project the real-time images around the vehicle onto the original screen of the car,assist parking in all aspects and reduce the blind spots in the driver's field of vision.

 

This product is plug-and-play, easy to install and will not damage the original functions of your car.It's worth mentioning that its built-in dynamic guidelines are very flexible and accurate.It can be adjusted in real time according to the rotation of the steering wheel,plan out precise parking trajectories for you and ensure that every parking is safe and efficient.This will greatly improve your driving experience,help you say goodbye to the potential risks when parking and allow you to fully enjoy the pleasure of driving.

 

Function:

Present undistorted high-definition images. Ensure the best visibility even in low light conditions.

Applicable to the original factory screens.

Supports the original factory operating systems.

Supports the original vehicle radars.

The rear-view camera can be installed additionally to display the rear-view images and dynamic guidelines. 

The front-view camera can be installed additionally to display the front-view images.

The front-view channel can be compatible with DVR/360-degree camera modules.

 

Product application:

reverse assistance: 

When the vehicle enters reverse gear,the camera will automatically activate and transmit the rear image to the interior display. The driver can intuitively see the obstacles and pedestrians behind the car,

and adjust the direction according to dynamic guidelines to avoid collision.

 

Multi-camera integration: 

Multiple camera signals can be integrated, such as front, rear and 360-degree cameras.The driver can switch the screen,view the situation around the car, avoid scratching obstacles,and fully ensure the safety of reversing.

 

Low-light environment enhancement:

At night or in dim light,the system will optimize the images captured by the camera to enhance the brightness and contrast of the picture.So that the driver can still clearly observe the object behind the car, to ensure the safety of reversing at night.

 

Product packaging： 

Sturdy corrugated boxes are used,combined with multiple layers of protective packaging to prevent product damage during transportation.

 

FAQ：

A:Are you a trading company or a manufacturer? 

Q:Roadpassion is a manufacturing company specializing in the research and development of intelligent vehicle safety assistance systems. Our team is composed of experienced engineers,professional sales and enthusiastic and responsible after-sales personnel. RoadPassion has obtained 7 invention patents, CE, FC, Rohs, 7 utility model patents, 24 software Copyrights and other intellectual property rights. In addition,we are working hard to develop new products to meet different requirements.The company is located in Guangzhou,welcome to visit.

 

A:Are your products reliable? 

Q:Roadpassion has factories and offices officially authorized in China, and our products are also applicable to EU regulations.We offer a 12-month warranty period. Meanwhile, we have a professional after-sales team to solve any of your problems.

 

A:Is this product suitable for me? 

Q:Different vehicle models need to have the corresponding models of products installed. For details,please refer to the product parameters.You can also contact us and provide detailed information such as the model and production year of your car. Our staff will confirm for you whether your car can use our equipment.

 

A:What kind of trade terms do you have?

Q:The FOB trade terms are adopted.

 

A:What if there is no product for my car model?

Q:We are glad to provide you with a customized service. Please consult our team for detailed customization process.

 

A:Can I get a sample?

Q:Yes, you can place an order to purchase our sample.

 

A:How to install the product?

Q:We have provided instructions for the product. Please install it according to the instructions above. If you encounter any difficulties, please contact us in time and we will be glad to offer help!