The wear of bulldozer track rollers can be attributed to several key factors:

Contact with Track Link : The primary cause of wear on support rollers arises from the contact between the roller body and the track link, particularly due to friction on the track link surface. This wear manifests as a reduction in the diameters of the outer flange, roller surface, inner flanges on both sides, and overall width of the track roller.

Insufficient Lubrication: Inadequate lubrication can result in wear from relative motion between the pin and pin bushing, which subsequently shortens the service life of the bulldozer track roller.

Inadequate Track Tension: Insufficient tension in the track can cause lateral bending of the track links during steering maneuvers. This bending leads to the roller flanges pressing against the upper surface of the track links, resulting in significant wear.

Misalignment of Bulldozer Track Roller Center: If the center of the support roller is misaligned with the center of the track or if the rollers are not aligned in a straight line, this can lead to severe friction on one side of the roller during linear movement, accelerating the wear process.

Material and Manufacturing Quality Issues: The use of substandard materials or materials with inadequate hardness can lead to accelerated wear during operation. Additionally, non-compliance in the dimensions or surface roughness of components such as bushings and axle seats can result in abnormal wear patterns.

Inefficient Oil Sump Design: A poorly designed oil sump, such as one with rounded edges in a long oil sump, can lead to dry friction between the axle and the bushing, causing abnormal wear. Furthermore, ineffective lubrication oil film formation exacerbates the wear issues.