Happy to show this sleek silver wheel to you. Size:22x9.5, CB:78.1, PCD:6x139.7, ET:22. The wheel features a unique multi-spoke pattern, with each spoke expanding outward and tapering gradually, resembling a propeller design. This not only enhances the aesthetic appeal but also strengthens the wheel's durability and stability. At the center of the wheel, there is a circular DH brand logo, surrounded by raised edges, showcasing the brand's prestigious identity and adding depth to the wheel's design.

As a professional wheel manufacturer, DH always focuses on technological innovation and quality assurance. We utilize high-quality T6061-T6 aluminum alloy material and go through precise forging and polishing processes to create this wheel that combines exceptional performance with stylish appearance. Our wheels are not only lightweight and high-strength but can also be customized according to your needs, fulfilling your dual pursuit of vehicle performance and appearance.

The pure white background forms a striking contrast with the wheel, further highlighting its unique design and exquisite craftsmanship. Choose DH wheels and make your car a standout sight on the road!

When it comes to wheels, the termssize,PCD,ET, andCB refer to important specifications that ensure proper fitment and performance on a vehicle. Here's a breakdown of each term:

1.Size of the Wheel

The size of a wheel typically refers to two key measurements:diameter andwidth.

Diameter: The overall diameter of the wheel, usually measured in inches. Common sizes include 15-inch, 16-inch, 17-inch, 18-inch, and so on. This measurement corresponds to the distance from one end of the wheel to the other, from edge to edge.

Width: The width of the wheel is also measured in inches and refers to the distance between the inside edges of the wheel's rim, where the tire sits. For example, you might see a wheel labeled as 18x8.5, which means the wheel has an 18-inch diameter and an 8.5-inch width.

Example: A wheel size of 18x8.5 means:

· 18 inches in diameter

· 8.5 inches in width

2.PCD (Pitch Circle Diameter)

· Definition: PCD refers to thediameter of the circle formed by the centers of the wheel’s bolt holes.

· Format: It's represented by two numbers: the number of bolt holes (studs) and the diameter of the circle (in mm). For example,5x114.3 means:

o 5 bolt holes

o 114.3 mm diameter of the circle passing through the center of the bolt holes.

Example:5x114.3 means:

· 5 bolt holes

· A bolt circle diameter of 114.3 mm

3.ET (Offset)

· Definition: ET, oroffset, is the distance from the wheel’s mounting face (the part that contacts the hub) to the wheel’s centerline.

· Types:

o Positive Offset (ET +): The mounting face is towards the front (towards the wheel's outer side), pushing the wheel inward.

o Negative Offset (ET -): The mounting face is towards the back, pushing the wheel outward.

o Zero Offset (ET 0): The mounting face is aligned with the centerline of the wheel.

Example:ET40 means:

· The mounting face is 40 mm towards the outside of the wheel centerline.

4.CB (Center Bore)

Definition: Thecenter bore is the diameter of the hole in the middle of the wheel, which fits over the hub of the vehicle. It’s crucial for the wheel to match the hub size to ensure the wheel is properly centered.

Common Sizes: Center bore sizes vary based on the vehicle make and model. For instance, common center bore sizes are56.1 mm,66.1 mm, or70.3 mm.

Example:CB 66.1 means:

· The center bore is 66.1 mm in diameter.